/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- uartinit
- uartputc
- uartgetc
- uartintr
1 // Intel 8250 serial port (UART).
2
3 #include "types.h"
4 #include "defs.h"
5 #include "param.h"
6 #include "traps.h"
7 #include "spinlock.h"
8 #include "fs.h"
9 #include "file.h"
10 #include "mmu.h"
11 #include "proc.h"
12 #include "x86.h"
13
14 #define COM1 0x3f8
15
16 static int uart; // is there a uart?
17
18 void
19 uartinit(void)
20 {
21 char *p;
22
23 // Turn off the FIFO
24 outb(COM1+2, 0);
25
26 // 9600 baud, 8 data bits, 1 stop bit, parity off.
27 outb(COM1+3, 0x80); // Unlock divisor
28 outb(COM1+0, 115200/9600);
29 outb(COM1+1, 0);
30 outb(COM1+3, 0x03); // Lock divisor, 8 data bits.
31 outb(COM1+4, 0);
32 outb(COM1+1, 0x01); // Enable receive interrupts.
33
34 // If status is 0xFF, no serial port.
35 if(inb(COM1+5) == 0xFF)
36 return;
37 uart = 1;
38
39 // Acknowledge pre-existing interrupt conditions;
40 // enable interrupts.
41 inb(COM1+2);
42 inb(COM1+0);
43 picenable(IRQ_COM1);
44 ioapicenable(IRQ_COM1, 0);
45
46 // Announce that we're here.
47 for(p="xv6...\n"; *p; p++)
48 uartputc(*p);
49 }
50
51 void
52 uartputc(int c)
53 {
54 int i;
55
56 if(!uart)
57 return;
58 for(i = 0; i < 128 && !(inb(COM1+5) & 0x20); i++)
59 microdelay(10);
60 outb(COM1+0, c);
61 }
62
63 static int
64 uartgetc(void)
65 {
66 if(!uart)
67 return -1;
68 if(!(inb(COM1+5) & 0x01))
69 return -1;
70 return inb(COM1+0);
71 }
72
73 void
74 uartintr(void)
75 {
76 consoleintr(uartgetc);
77 }